Category Archives: Uncategorized

More features of energy saving LED light source

More features of energy saving LED light source
Led  light  source  characteristics

Can be programmed and control multiple  simultaneous changes, can be realized simultaneously colorful, transition, scanning, Water lights and other full color changing effects. It is also can be a plurality of point light source composed of dot matrix screen, change the a variety of pictures, text, animation and so on; with low power, long life(long service life.) and other characteristics.

Led light source functionality
 Led light source and LED display can be controlled by the computer  for real-time transmission of advertising information, advertising video, free to replace the advertising content, while the higher pixel LED display, display accuracy is correspondingly higher, close the effect better, led spot light display
WS2811 Diffused LED Pixel Module

Features of  LED light source1

is also quite good visual effect in remote viewing, to meet the needs of  distance vision of large-scale advertising, neon billboards change relatively monotonous, can not be real-time transmission and replace the advertising content, poor functionality.

Led light source using a variety In different occasions
   Led light source can be used not only dot matrix display,but also can be used for housing, bridges, city lighting project outline the buildings, hotels, hotels and other places of entertainment, indoor decorative lighting project, has a great market prospect(market potential.).

LED point light source of environmental protection

Green Lighting is the world follow the eco-design goal, LED is the LED point light source of a high efficiency and energy saving, no mercury filled, can reduce energy consumption and reduce greenhouse gases and other pollutants into the atmosphere, LED can also be used in combination with solar cells, it is one of the most environmentally friendly source of led light source.

LED point light source — Taking LED as a point light source of luminous body

LED point light source — Taking LED as a point light source of luminous body
The concept of led light source:LED point light source is to use LED as the point light source, LED point source(led spot light) belongs to one of the artificial electric light source. LED light-emitting diode, is the use of semiconductor pn junction, the homogeneity heterogeneity PN junction, the metal semiconductor junction (MS), a metal insulator semiconductor (MIS) node of the light made of light-emitting devices. The working principle. The working principle it works on the same principle as other electrical properties of generally crystal diode, however, different crystal materials used.

At present, LED point source LED including visible light; not visible light, laser and other different types,the common light of life is visible light.
Light-emitting diode light color depends on the materials used, there are a variety of colors yellow, green, red, orange, blue, purple, blue, white, full-color, etc., can be made into various shapes such as rectangular, round and so on. LED has the advantages etc., LED has a long life (LED servier time),small volume, light weight, low power consumption (energy), low cost, and low operating voltage, high luminous efficiency, light response time is very short, wide working(operating temperature range, color pure, firm structure (impact resistance, vibration resistance), performance is stable and reliable and so on a series of characteristics, so people favor.Because LED luminous body close to the “point light led light source”, lighting design is more convenient, however, if a large area display, current and power consumption are larger. in General LED lights can be used in electronic equipment, digital control, display boards and other display devices and opto devices, is also commonly used decorative optical communications, as well as building outlines, amusement parks, billboards, streets, and other places of the decoration stage.

LED point light source (parameter + technology + installation) let’s talk about them again

The Parameters of Led point light source
1, Electrical characteristics
  Including volt-ampere characteristics, allowing power consumption, response time, the capacitance – voltage characteristics.

2, The optical performance characteristics
 Including spectral characteristics, with light distribution characteristics, mainly for the brightness or lumen value, the light fades, loss of efficiency, luminous efficiency, consistency and optical distribution characteristics. Usually adopts the peak wavelength and half brightness, describe the spectral characteristics of the spectral distribution.

3, Thermal of properties
  Heat-related characteristics reflect the junction temperature change, resistance, etc. led light source with high brightness LED as the light source, long life, low function,  die-casting aluminum lamp body, PC lamp shade, green environmental protection. Like the stars in the sky, give a person infinite daydream.
The use of dots of matrix combination theory, the use of LED digital programmable controller computer system to realize the different types of animation (Gif, Flash), dot matrix text, graphics (JPG, BMP), and various lighting effects.

(B).The Led point light source technology parameters:

Light source: high brightness LED

LED color: red, yellow, blue, green, white, RGB, YW

Working voltage: DC12V/110V

Working temperature: -40~50 °C (-40~+50 °C)

Protection grade:IP65

Driving way: constant current

(C).Led point light source material:
*The lamp body is made of die-casting aluminum,

*lamp shade for the PC material,

*material polyester prism through the mask heat sink design

*aluminum body rubber seals

(D) .The application scope of Led point light source:
For entertainment, outdoor advertising signs (door), large office buildings, landmark buildings and indoor and outdoor decorative lighting and so on.

Power: 2W

Casing material: PC

External diameter: 5-200mm

(E).Led point light source installation

1. The first available screws or glue fixed mounted light fixture desired position.
2. Follow the installation drawings connect the power lines and signal lines, and the waterproof treatment.

Installation note issue:
A. Note that supply operating power supply coincides with led light source.

B. Light body will be connected between the signal line and the controller properly. The Power line of controller connected to provide normal power supply.

C.Be prepared (Waterproof treatment)for connect power line and signal line.

what reason is caused Dead lights of LED point light source lamp?

What reason is caused Dead lights of LED point light source lamp? For details, see below.
The leakage current of LED point light sources are caused by excessive PN junction failure.In generally LED chips are injury by static electricity, the PN junction LED chip failure, leakage current increases,the LED light source will turn into a resistance, this usually does not affect the LED point light source and other work. which generally does not affect the work of other LED point light sources.Prevent electrostatic damage to electronic components, is a very important work of the electronics industry, LED packaging, application of the enterprise must not be taken lightly.  Any one part of problem, will cause damage to the LED light source, LED light source to the bad performance or even failure.LED spot light lamp wiring open solder joints causing death.LED point light source connection solder joint make Dead lights by Open circuit of light.Internal connection wire of LED point light source is disconnected,resulting in the death produced when not have current inflow of the LED lights, this situation will affect the normal work of other LED light source, the reason is the low voltage operation of LED light source, the general should use string, parallel to join, to adapt to different operating voltages, More series of LED light source draw the influence of LED light source series.can use a weld method In such a situation,Will not bright LED light source with a lighter LED lead is heated to 200-300 ℃, remove the lighter, with 3-volt button batteries connected LED by positive and negative,  if LED light source can be light, but with the lead temperature reduced By the light turns the not bright, which proves that LED point light source is weld.the reason of Heating can light is based on the principle of metal thermal expansion and contraction, elongation and internal solder connected with the expansion of LED lead when heated, when the power is switched on, the LED point light source can be a normal lighting.The two way cause of Dead lights phenomenon of LED point light source lamp. But only to comply with the using rules of LED point light source, the above two phenomena can be avoided.

Requirements of Decoration luminaries

How to layout the LED lighting project, creating environment of exquisite luxury Home Furnishing!
decorate LED

The indoor lighting of Home Furnishing should coordinate with different number of LED lights, different LED lights, and different LED lamps, in addition to the master of light, to the visual health, light source The use of requirement, but also have different design styles. You can use light to regulate the master feeling for indoor light . You can also take advantage of well-being Tones to decorate the room.Doors, lobby, corridor lighting,this is the first impression when entering the room, but also reflect the effect of one of the standard interior decoration, so LED lighting Generally used in small LED bulb, LED ceiling lamps or a square LED,about size, specifications should be with the overall matching. Sometimes the owner will be arranged in the doorway LED spotlights lamp, door and hallways or other rooms should have a primary ,followed by points, while the lobby is a public place, his cloth lamp is very important, so you can choose the Bright LED Downlight as first choice, so look magnificent, luxurious fine!

LED light source still is mainstream technology of micro projection in the next two years

The micro projector, since the second half of 2008 into mass production, liquid crystal on silicon (LCoS) and TI (Texas Instruments) independently developed the digital light processing (Digital Light Process; DLP),there are two technical, and called the mainstream for micro projection technology. At present, two kinds of micro projection technology using LED as the light source, in LED mass production
as the LED production of the high ability of mass production manufacturers more and more, the cost is also continued to decline. Among them, the LCoS micro projection technology can be used for white light LED with color filter, effectively reduce the micro projector costs, and enhance the penetration rate.

In 2010, with the consumer electronics market is gradually recovering, terminal manufacturers and consumers of micro projector technology requirements will be more strict. Therefore micro projector quality development will have three major trends, including brightness upgrade, the resolution improvement, and improved color performance.

In order to improve the luminance, LED vendors are increased the LED luminous efficiency year by year white LED with a color filter, although the advantage of reducing costs, but inevitably affect the color performance, so LCoS pico projectors terminal manufacturers have shift to RGB Full color LED pixel light source. As for the resolution, although decided by the panel side in theoretically , but if the brightness of less than a certain standard, then high resolution panel, is immune to the appropriate display.In addition to LED, the laser also has bigger opportunity for mini projector light source potential. At present, although there have been a variety of new micro projection technology with laser light source, but only American Microvision alone developed the two-dimensional scanning MEMS micro-projection technology has been introduced into mass production in early 2010.
Although the laser light collimation good because without merit manual focus, but will thus cause the laser spot (Speckle) phenomena affect the quality, though not not be solved, but still big trouble.
In addition, the current due to the green laser into volume production time soon, and only American Corning (Corning) can be mass production, the price is expensive,  so with laser in the mini projector light source to achieve popularity may have more than 2 years.

Target classification and application of led pixel light

The Diffused LED Pixel Module can be used to draw a target point with cast light, the distribution of light have isotropic properties, spotlight and web three options.The function and target of The Diffused LED Pixel Module light source is same whit light source of target.  just not the target point, the user can change the direction of the light. Similarly, the free light also has above three kinds of light control light distribution properties. Line source is also divided into goal line source (Target Linear) and free line source (Free Linear)  two types.
Target line can be used to cast light source to a target object, which has a diffuse light distribution properties (Diffuse) and mesh (Web) two kinds. Freedom line source function and target line light sources, but no target object, the user can change the direction of the light.

The same free linear LED point light source also has above two kinds of spectrophotometric control properties of light distribution. Wherein the diffuse distribution of the light will be the greatest at an angle to the surface of the projection light intensity, as light intensity decreasing angle of tilt, Web distribution type allows users to customize the intensity of the light emitted. Led light source Typical applications
pixel led 12V fuction-2

1, LED point light source combined into a sphere light display: LED point light source to made the sphere of light screen
2, the combination of LED point light source into a super large LED curtain screen:

Installation Instructions for Side Emitting LED Strip Lights

Installation Instructions forSide Emitting LED Strip Lights
Side Emitting Waterproof LED Flexible Light1 Side Emitting Waterproof LED Flexible Light

* Side emitting LED flexible tape using (120 LEDs)
per metre. This LED tape emits light from the side allowing the
LED tape to be used around curves making it perfect for applications such as signage and light boxes.
* This LED side emitting tage is cuttable every33.3mm
(every 3 LEDs)using scissors, is fully
dimmable and is supplied with a 3M sticky tape
backing for easy installation.
*This side light emitting LED tape operates from
(12vdc and 10 metres) can be powered as a single
length.Longer run lengths are possible by introducing additional

Power supplies.

1. Clean the mounting area with alcohol prep swab.

2. Remove backing paper from two sided tape on back of light. Apply light at desired location and press lightly onto the bike.

3. Connect red wire to desired power source, such as running, brake, or turn signal circuit.

4. Connect Black Wire to proper ground.

5. Test for proper operation.

The advantage of Side Emitting LED Strip Lights:

1, Power saving, less heat, only low power consumption, suitable for any 9-14V car power;

2, Long service life, using this product is imported LED lamp wick;

3,  Fully sealed waterproof design (high quality soft sealed), 100% waterproof;

4, The pressure, shock, impact resistant, soft material, durable;

5,  High brightness, long service life, brightness uniformity, no color, wide coverage

 

Description of 5050LED chip LED package and a 3528 chip LED package

1, What is the difference between the 5050 SMD LED and the 3528 SMD LED Mainly represents specifications outline dimensions: 35mm*28mm, 50mm*50mm size is not the same, the power is not the same, in SMD 3528 application, whether in brightness or in life are not advantages compare with SMD 5050, size is not the same. 2, What are these use for the 3528 and 5050 SMD LEDSMD 3528 and SMD 5050, is surface encapsulation size of SMD. Using the package dimensions as name. Compare with The DIP lamp ,the lamp brightness of Surface mount type SMD lamp is low , but compared other, convenient repair, angle is bigger. So the general almost use the SMD chip LED in indoor LED display screen  3, LED soft lamp strip 50505050 is the LED package types. The package dimensions as Name (SMD5050). Refers to the 5050 type LED lamp.
4, what does mean about compatible with piranha 02.03.04? How are SMD? What is big power?
Piranha is composed of a SMD chip, 02.03.04 is LED the type of the bracket. SMD=”Surface Mounted Devices”, meaning: surface mount device SMD is a unified model of product. For example: TOP, Chip, can become a SMD, is also belong to the flat package.SMD chip is a bit vague, encapsulated with 5050 or 3528 SMD chip to do the piranha.
Of course, there are many kinds of the chip size. Used to do the SMD size ranging from 7 * 9mil–24 * 10mil.High power: voltage is more than 0.5W, can call the big power.
Basic knowledge of LED Testing Technology
The forward voltage: through the forward current of light emitting diode in order to determine the value, the voltage drop generated in the polarization .

Reverse current: in order to determine the value of the reverse voltage across the light-emitting diode (when the current flowing through the light emitting diode).

The peak wavelength: power maximum of spectral radiant.

Half intensity angle: the luminous (or radiant) intensity distribution, luminous (or radiant) luminous intensity is greater than or equal to the maximum intensity constituted half angle.The dominant wavelength: any color can be looked at as a spectral color, according to a certain proportion and a reference light source (such as the CIE standard light source A, B, C, etc. can source E standard illuminant D65) phase mixing and matching color coming out, the main wavelength of the spectral color is the color. Dominant wavelength is equivalent to the human eye observation to color palette (mental capacity). If you have obtained the chromaticity coordinate measured LED device, can use to white E light source (x0=0.3333, y0=0.3333) as a reference to calculate the main wavelength and determines the color of the light source. Calculation based on a chromaticity diagram connection reference slope straight line light source color point and the sample color chroma point of intersection line, look-up table read and spectral locus, determine the main wavelength.

The average intensity of light source: ratio of units in a given direction on a solid angle element is contained within a small flux D Phi V and the solid angle of D Candela (CD)

Radiation bandwidth: spectral radiant power is greater than or equal to the maximum value of half the wavelength interval

Test of Infrared emitting and receiving

LLZ the principle of infrared, infrared remote control has been widely used in home appliances and industrial control system, understand their work principle and performance, further made the infrared remote control system, also is not difficult.
characteristic of infrared eye can see the visible light wavelength, according to arrangement, in turn (from long to short) for the red, orange, yellow, green, cyan, blue, purple, as shown in figure
1. Can be seen from the graph, the red light in the wavelength range of 0.62μm ~ 0.76μm, longer than the red wavelength light is infrared. Infrared remote control is the use of wavelength of 0.76μm ~1.5μ m near to transmit a control signal. Mainly Feature of Infrared is that it does not interfere with other electrical equipment, it will not affect the surrounding environment. the Circuit debugging simple, if the transmitted signal code, can realize the function that multi-channel infrared remote control.
2 Infrared remote control system of infrared emitting and receiving
people see consists of transmitting and receiving the two part. The emission component parts for infrared emitting diode, it emits infrared rather than visible light, as shown in figure
2.Common infrared wavelengths emitted from the light emitting diode is about 940nm, the shape and the ordinary 5 mm light emitting diode is the same, but different colours. In general there are transparent, black and dark blue three. Method for judging the quality of infrared light emitting diodes is same with ordinary diode.emitting power of the infrared light emitting diodes is about 100mW. Luminous efficiency with a special instrument for determination, on amateur conditions, can rely on the experience with the distance of roughly determination method. The infrared receiving tube receiving circuit is a photosensitive diode, when used for infrared receiving diode reverse bias voltage is applied, it can work normally and obtain high sensitivity.How it works: infrared photosensitive resistance is actually a resistance.in a high impedance state is close to the 6K when not have infrared lighting. completely avoid the light may not only, The mainly parameter of Infrared LED(receiving module) as follows:
work voltage:4.8~5.3V
work currently:1.7~2.7mA
receive frequency:38kHz
peak value of wavelength:980nm
static state of output:High level
low level of output:≤0.4V
high level of output:VDD voltage
The infrared receiving diode are generally circular and square two. Because the transmitting power of the infrared light emitting diodes are small, weak signal received by the infrared receiving diode, so the receiver will increase the high gain amplifier circuit.