Category Archives: Uncategorized

The service life problem of IR LED

The camera’s service life is more than 10 years, whether the infrared lamp life can reach this level(10 years)? Get the correct answer before. First you must understand the infrared lamp manufacturing principle At present, there are mainly three kinds of infrared lamp manufacturing model:1, halogen lamp: 2, multi chip LED, 3, Single chip LED. Halogen lamp is a traditional technology, high energy consumption, high quantity of heat, short service life, because of its low efficiency, evaluation Meter will gradually fade out of the IR LED market.Multi chip LED also has two kinds of forms, one kind is contains 4 to 8 LED chips; another is the array type light-emitting chip, containing 10 to 30 LED chips Why do the chip? Some theory from manufacturers: infrared lamp irradiation distance is not enough because the energy is not enough, more chip set Together, of course, energy is high, the farther the distance requires more energy,But the camera not can receive all infrared lighting.Multi chip LED due to inherent shortcomings of structure that does not light focus, emitting optical system is not reasonable, useful optical efficiency is relatively low (However, several times stronger than halogen lamps), its advantage is not effectively play out. For example, the array type LED, current up to 1000mA above, basically only A penny coin size, heat dissipation becomes a problem. LED is most afraid of fever, At the same time, multi chip LED Production requirements are very strict, each chip can have a little difference in performance, or a chip broken will be draw all finished Overall,compared with the single chip LED, multi chip LED service life is not enough Single chip LED has the advantages of simple production process, quality easy to guarantee, low heat, light emitting optical system is reasonable, In theory Single chip LED is the ideal device as the infrared lamp, the service life can reach more than 100000 hours. So, Is it right? All single chip LED lamp life is very good?

In fact, the answer is inaccurate. Are there were many reasons for this, such as some LED chip level is very low, high impurity; some production Technology doesn’t pass, leakage phenomenon; some super power use, rated at 20mA, but the use of 50mA or above; have no protection circuit, or the circuit design unreasonable, all these will lead to single chip LED of infrared light fast broken.

If you want to ensure that the infrared lamp service life,
First to choice the LED chip of high grade,High grade chips with high power and good consistency, luminous efficiency High heat is very small, a higher level quality of LED is 10 times than normal LED quality,of course, the price is very expensive.
Secondly, the optical system design Meter should be reasonable, luminous uniformity, higher utilization rate, heat dissipation is faster.

Third, we must strictly control the working voltage. LED is very sensitive to voltage, LED tube core will be burned when Voltage slightly higher; and the voltage slightly low luminous quantity will be greatly reduced. The best matching switch power supply of high quality, AC transmission Into the best voltage from 170 Volts to 270 volts can do better regulated power supply, suitable for harsh environment.

Fourth, the input power supply line selection of resistant high / low temperature is Good, and super soft bending. There is a manufacturer of infrared lamp and input power line can be work at 60 degrees below zero and high Temperature 250 degrees above, this product is worthy of trust.

Constant current drive design of High-power LED lighting

  The putting forward of the problem
In general, at least in the 1W above call high-power LED power。The 1W, 3W, 5W, 8W and 10W is common on currently,Which is known as the “green light”, is moved to new development direction that a large current (300mA ~ 1.4A), high efficiency (60 ~ 120lm / W), adjustable brightness。However, the LED current is determined the luminous intensity of high power LED。LED current is too strong will cause the LED lighting is too weak, the current is too weak will affect LED luminous intensity,and therefore need to provide constant current LED driver power to ensure power safety LED use, but also need to meet the expectations brightness requirements, and ensure that each the LED brightness, color consistency. So, traditionally used to drive the bulb (tungsten wire), power fluorescent lamps, energy saving lamps, sodium lamps and other light sources are not suitable for direct drive high power LED. LED Driven by mains power supply also need to address the buck, isolation, PFC (power factor correction) and constant current problem, need a higher conversion efficiency. Currently, there are thousands of models dedicated high-power LED constant current driver chip on the market, Most adopt a dedicated hysteretic converters of chip, low voltage input range, boost, buck can, PWM control, power switch can be internal or external, the output current can reach 1.5A, the built-in overvoltage, undervoltage, open / short and temperature protection circuit.

Head light with LED single chip high power

Herein head light heat is too high, heat dissipation requirements are quite high, operation process a lot of problems.so many users are very headache. Another problem is light failure (lighting loose),large power consumption and high cost of replacing the light source, resulting in the technical requirements are also high up for manufacturers in the production. with low-cost to induced ignorance customer of manufacturers that production of substandard products and no technical force。Appears in engineering problems frequently。
Here would like to thank The LED manufacturers in domestic, The LED manufacturers created a precedent in this LED industry, make high power head light with single LED COB. If we do not error in our memory, the first head light with 3PCS 3W lamp is the so-called 15W LED small head. In the conditions of superiority, soon other LED manufacturers imitation of that product is perfect. So many LED manufacturers will benefit from this product, so this is not only our domestic lamp pride, we have to thank the very visionary boss of LED manufacturers。LED single chip high power head light now has 27W lamp, 50W lamp beads 3 prism effect,
80W 100W 5 lamp beads 5 prism effect. The 100W lamp can be ultra conventional 250, compared with the conventional 575. But the color temperature of LED and conventional lamp everybody should know, if the color temperature requirements is demanding we suggest that still continue to choose the regular lamp。Because this is fundamentally different.At present, many of our customers in some places slow shark bar using our LED head spotlight 30W and 50W, the time has been more than half a year, Giving satisfaction sufficient to meet a demand form the customer at present。Because the main purpose is to help them solve the problem after service。 The need to replace the light source, power of temperature is small, the failure rate is very low. But these customers also reflects some problems, long life, light a long time can be used, their business may be affected. Because this lamp has the advantages of low cost, long service life at present, use a year without a problem, maintenance costs can buy a conventional head light. The use of time longer, in this way ,work not easily for retail business.

The ceramic COB flat light source is trend of LED packaging technology in the future.

LED light source products will become the substitute of green energy, the continuous innovation of product development, and has the advantages of smaller volume, higher efficiency, the greater the wattage, the lower the price will become the future trend of LED development。And can meet the requirements above。In recent years, due to the global energy consumption and environmental deterioration, countries rising awareness of environmental protection, have been putting forward proposals to ban incandescent bulbs and other policies. LED lighting products become the alternative green energy, in constant innovation in product development, while smaller, more efficient, the greater the wattage, the lower the price will become the future trend LED. Some of the limitations of the traditional materials development, but in recent years the ceramic substrate package, launched a broader advantage, making the development of LED, can meet the above requirements.

A 、What are the application advantage of ceramic substrate?

1、 high luminous efficiency, white light can up to 110 lm/w, the light emitting angle of 120°;
2、 high thermal conductivity, the thermal conductivity is 23W/mok, the thermal channel short;
3、high reliability, material of ceramic and chips are AL2O3 alumina ceramic, similar coefficient of expansion ,not due to temperature changes was cause of the grain open welding, to draw the decay and dead lights, to ensure the stability of the chip;
4、low thermal resistance, high voltage 4000v above, can lead safety certification in Europe and America. LEDLightMake Co. application of the advantages above, focus on ceramic substrate COB surface light source, LED ceramic surface light source, cob ceramic substrate surface light source module,LED COB light module source and ceramic flat production, sales and technology development.
offers GT series GT series offers a range of products, 40 * 12, 25 * 25, 35 * 35.50 * 50 series, from 1w-60w solution, whether it is LED ceiling light, LED track lights, LED ceiling lights, LED lamp, bulb, plant lights, reading lights and other decorative lighting above, also provide suitable products, in addition to high efficiency, high quality, the price is quite competitive.

On white lighting models, available now 110lm / w of the products, other plane of the light source can also provide international companies with comparable products in the series the.

B, High-Brightness LED Future Trends Beginning in 2009, beginning of concern that LED lighting source products。due to energy saving, high efficiency, mercury-free, long life … and other characteristics, and gradually began to flourish, and various concerns, so in 2010,some manufacturers have added lighting the ranks of the application of LED。Looking to 2013, in the world, including the United States, China, Korea, Taiwan … etc., are committed to accelerate national and industry standards, making poor physical LED manufacturers will face the fate of the closure and consolidation, which will increase the relative consumer confidence (including governments, businesses and consumers in general), after 2014, LED lighting will be price, quality and efficiency reaches a certain level,
so that the demand of LED will be quickly grow up.

COB light source module will become the mainstream of encapsulation mode

LED packaging form divide of separation and integration。LED separation device belongs to the traditional form of packaging, widely used in various related fields, after nearly forty years of development, has formed a series of mainstream product form. The LED COB module  belongs to the personalized packaging forms, mainly for the application of some cases and personalized product design and production, has not formed the mainstream form ofproducts.Semiconductor lighting to enter the general lighting field, the cost of production is the first major constraints. To reduce the cost of semiconductor lighting, we must first consider how to reduce the cost of the LED package. The traditional approach is LED lighting: LED light source module separation devices → MCPCB lighting module→ LED lamps, mainly based on the core source components do not apply and the approach is not only time-consuming work, and high costs. In fact, we can be “LED light source module separation devices → MCPCB lighting module” combined the MCPCB lighting module and LED chips together to make COB light source module direct, take the “COB light source module → LED lamps” route, not only can save time, but it will save the cost of the device package. The cost, compared with the separation light source device, COB light source module can save device packaging costs in lighting product applications。light engine module production cost and the secondary light distribution costs.In the same function lighting system, the overall cost can be reduced about 30%, which is for the promotion of semiconductor lighting applications has great significance. In performance, through rational design and molding microlenses, COB light source module can be effectively avoided discrete light source device present in combination in the light, glare and other disadvantages, but also by adding an appropriate red-chip combination, without reducing the light efficiency and life under the premise of effectively improving the color of the light source (now can do 90 or more).

What is the storage environment is requirements for mine LED laneway lamp?

Mine LED laneway lamp can be normally used in the following circumstances:

1, the environmental temperature of -5℃~+40℃

2, the average relative humidity of not more than 95% +25℃

3, the atmospheric pressure 86~106KPa
What is the transportation is requirements for mine LED laneway lamp?
1, mine LED laneway lamp in the transport process not allowed by mechanical shock and intense heat and rain, not inverted, to prevent a throw, tumbling, weight

2, mine LED laneway lamp should be stored at environment temperature (-20~40 ℃), dry, clean and well ventilated, non corrosive medium in the warehouse, should keep away from fire and heat source.
High quality What is the storage environment is requirements for mine LED laneway lamp?
for your information!

The power driver board of laneway lamp

First, we first understand that the design structure of laneway lamp power driver board, it adopt the structure principle of non electrolytic capacitor and high-power integrated LED, utilization of high material, so as to avoid the the electrolytic capacitor achieve the dry electrolyte and excursion of temperature in high temperature。To creating favorable conditions for improving the reliability of products。
Then we’ll know the compensation design of laneway lamp power driver board, it is using the design of high power factor active compensation, active compensation is more reasonable than the explosion-proof headlight design more comprehensive, complete machine power factor in the use of voltage range, rated according to the requirement of field environment, not less than 80%, not more than 95%, in a plurality of lamp body work together can effectively reduce the internal grid work pressure.
Third. To understand the application technology of laneway lamp power driver board, it is used a wide voltage application technology, which will be the overall power in addition to the rated voltage (90 ~ 140VAC), to determine the installation method and position of lamps on the lower limit。
voltage of electricity grid can keep the laneway lamp does not fully loaded in the 30VAC output, still show certain illumination, in the grid voltage reaches 265VAC, laneway lamp can keep a full load output in a short time, network wide voltage adaptive disturbance, type design can effectively resist the fluctuation of power grid。
Fourth, understand the laneway lamp power driver board according to the mine locale power fluctuations, interference of big situation, by using multistage interference protection measures, more, making better use of the characteristics of laneway lamp, miner’s lamp is much bigger than the advantage, the input point of the power adopts two grade common mode rejection, two grade differential mode rejection, one grade micro gap discharge surge absorption device and multistage design of anti-interference capacitor, prepared the corresponding length diameter Φ8 ~ 10mm three core cable sheathing line, can effectively restrain the power grid of coal mine driving at laneway cause of voltage is too large。anyway it is can shielded the interfere form high power pump and fan machine fast startup。
Fifth,To understand the isolation room design of lamp power driver board and connected to the grid line, effectively reduce the contact chance of spark and explosive gases, multistage seal is also beneficial in the isolation of external gas and electrical part。
Sixth,To understand the laneway lamp lighting optical design structure, light distribution more reasonable. first You must cut off the power supply,the effective distance of Rate power is 2 times that of the traditional laneway lamp。High quality lamp power driver board to produce high-quality laneway lamp in The selection。

Keywords; laneway lamp power driver board, tunnel lamp,

 

What is the use method of mine & laneway lamp?

This should be are very concerned who engaged in the LED project work,in follow we will be specifically introduce about knowledge of mine & laneway lamp。For your reference。

1、Firstly,determine the lamps installation position and way base on the actual needs。Then according to the distance of power node to lamp product to prepare the corresponding length of Φ8~Φ14 mm three core cable.

2、The open lamp cover side fastening screws,the upper cover is opened, a pressing nut and unscrew lamp cable inlet, the upper cover is opened, the power supply cable respectively through the nut into the internal wiring terminal, according to the graphic method for connection and fixation, and then tighten the cable clamp nut and a lamp cover.

3、The replacement of light bulbs, unscrew lamp ring six in fixed angle locking screws, the lamp ring and a transparent part module and the lamp body loosen, and replaced with a new bulb, lamps can be installed according to the opposite direction.On above to described the use of the methods is mine LED laneway lamp, for your reference.

What of characteristics Mining lamp has?

Mining lamp using the fourth generation high-power LED as light source,the standard of explosion in accordance with the national standard “GB3836.1.2.3 2010″ in the environment of electrical equipment requirements carefully design and manufacture, explosion proof mark ExdI, products the implementation of the standard GB3836-2010, MT221-2005 lamp, the coal industry in Shanghai electrical explosion-proof inspection station inspection, the standard of International Mine Safety Center issued signs safety signs the certificate.
1、 Mining lamp adopts international advanced electronic integrated circuit, wide voltage design, with wide voltage range, 85V ~ 265V voltage can be normal work. The light source adopts a DC, low voltage power supply, no strobo flash and electromagnetic interference, no red (purple) radiation, in fluorescent lamp mercury vapor and other pollutants, in line with EU standards is the future production of lamps, lighting source safety, health, environmental protection effect is obvious.
2、Lower power consumption, in the same illumination, the power consumption of the 1/10 incandescent lamp, energy saving fluorescent lamp 1/2, has obvious energy saving effect.
3、Characteristics of reasonable structure, beautiful appearance, small size, light weight, mining , shock resistance, heat resistance, good sealing performance, and maintenance free.
4、Unique design of the connect line, light source and input power separate cavity, makes the whole lamp not only has the advantages of beautiful appearance, convenient installation, and greatly improves the lamp explosion-proof, anti impact, anti vibration, heat resistance performance, national and industry standards of the indicators in full compliance with the mine explosion-proof lamp.

Package and heat dissipation of high power LED(1)

The smooth silicon surface has high reflectivity with aluminum metal layer。LED welding surface coated with gold, in order to provide the best heat conduction, and the chip and the lead frame, The bonding strength of copper radiator.ledlight local to the integral package structure schematic diagram. Its main characteristics: low thermal resistance ( 14 ℃ /W),only conventional LED of One of ten equal parts; high reliability,flexible package filled inside with the gel stability, at 40 to 120 ℃,
when due to temperature change can not be generated the internal stress,so that the wire and lead frame of a disconnected, and prevent the epoxy resin lens lead frame change to yellowing, nor because of oxidation and smear; the design of reflector cup and lens to make the radiation pattern, improve the efficiency of controllable optical.
In addition, the output optical power, good external quantum efficiency, LED solid state light source development to a new level. The wafer is thin, so it can play the maximum effectiveness of heat conduction,let the LED heat dispose quickly through this to the radiator.
In all kinds of ledlight products, a primary heat sink (Slug) (thickness of about 1.5mm) through the epoxy paste on MCPCB. The interconnection between MCPCB security of electricity (electrical interconnect), also with the second stage heat sink connection interface. In case no aluminum heat sink under the second level, LED can work under the room temperature, but the MCPCB is easy to reach 70 ℃.
Though the Multistage heat sink has a little resistance increased,but the Package and heat dissipation of high power LED The radiating surface greatly expanded (thermal conductivity in channel heat sink is often called the heatspreade two thermal diffusion layer, in the three dimension should have higher rate), so that the convection and radiation heat dissipation capability is greatly enhanced, and thus the whole system is improved.ledlight local to the integral package structure sketch。another figure limit the maximum junction temperature is a silicon carrier and inter chip due to different thermal expansion coefficient of the maximum allowable limit thermal stress. In many cases, high power LED chip by transition of Submount or heat spreader, mounted on the MCPCB, while the MCPCB close to the aluminum heat sink, both smooth surface or spring-loaded screws fastening。