Category Archives: Uncategorized

Package and heat dissipation of high power

Package and heat dissipation of High Power LED,also has the relationship between junction temperature and LED color. Generally under normal light color is most pure, junction temperature will result in increased or decreased light color drift. Different wavelengths of light
has different the temperature sensitivity。The least sensitive to the highest sensitivity green light, The blue lights has bad sensitivity。
In any case, color drift will make the color temperature is not stable, affect the optical properties of white LED.The structure and principle of High-power LED heat dissipation Package LED Chip heat by conduction to the heat sink, heat sink through the air convection or outward radiation. In the high power LED cooling channel, MCPCB (meta1 core printed circuit boards) is connected with the internal and external cooling channel, at least the following functions:

1) Radiating channel of High Power LED chip
2) electric LED chip connection;
3) The physical support of LED chip. Substrate materials for high power LED must have electrical insulation resistance, high stability, high thermal conductivity。 A few metals or alloys can meet the high thermal conductivity and low expansion coefficient requirements, To assume for electrical insulation, need to be coated polymer film (rarely have high thermal conductivity) or the deposition of a layer of ceramic film. Ceramic material of difficult processing and high cost, some semiconductor material physical parameters can well meet the requirements of the same substrate material, high cost, they are unlikely to be used for general lighting of the LED, but you can use a small as carrying LED Submount (one level heat sink), insulation function, attached to the heat sink (two level heat sink)。Power LED LumlledS as flip mode, with the silicon chip as the heat sink. Provide electrostatic protection through the zener diode of integrated in the silicon heat sink, this design can reduce the mismatch of thermal expansion coefficient of impact (silicon and sapphire substrate have similar thermal expansion coefficient). In addition, the silicon material and solder ball playing stress absorber, in order to further relieve the thermal expansion effect. In the silicon carrier adhesive solder ball makes the LED chip closely with silicon carrier joined together, and then the line connected to the lead frame.

The characteristics of LED mining lamp

The characteristics of LED mining lamp:
1, LED mining lamp using single High Power LED COB as the light source, the use of multiple chips integrated (Single mode light source design), selection of imported high brightness semiconductor chip, it has high thermal conductivity, low luminous decay, pure light color,No heavy shade etc.;
2, the unique design of the radiating system, combined with the electrical box is a perfect, effective heat conduction and diffusion, thereby reducing the lamp body The inner temperature, effective guarantee of the light source and the life of the power supply;

3, the radiating body surface treatment of anodized anti-corrosion, compact structure and beautiful;

4, The green environmental protection without any pollution, the LED mining lamp does not contain lead, mercury and other elements, there is no pollution to the environment;

5, good CRI   on the real color appears more real, various color optional, can meet the needs of different environments, the elimination of the traditional lamp color temperature is too high To come about low of depression, so that the visual feel more comfortable, improve people’s The work efficiency;

6, With constant current and constant voltage control, wide voltage range, overcome by the ballast to generate grid, noise pollution to result the light is not stable, avoiding eyes at work bring stimulation, fatigue;

7, good decorative effect, with a special surface treatment technology, novel appearance, simple installation, convenient disassembly, Applicable to a wide range。

Aluminum substrate most used in the wall lamp

Wall wash light aluminum substrate most used in the wall lamp, Buried lamp, Cast light on, in generally LED  Wall washing lamp voltage is divided into220V, 110V, 24V, 12V, usually Temperature size depends on the voltage The size,the heat dissipation and aluminum plate wall wash light aluminum substrate thermal conductivity on itself Department, to occupy the majority of the market are domestic aluminum material, compared with the general
coefficient of thermal conductivity of imports High, the price is also more expensive. Wall lamp use at outdoors,So the parameter becomes more important。 On the temperature requirements are high.In general we require outdoor
temperature at-40C+60C can work。 Because the wash wall lamp is make with aluminum shell, so This wash wall lamp (and LED controllers)can meet the requirements。

To Quote the Fiber optic lighting

Fiber optic lighting has many characteristics。makes its application is very extensive, Based on the use of different locations and the effect of the application example to analysis and explain。

1) Video conferencing desktop lighting
By the end of luminous system, configuration condensing lens type light emitting terminal accessory by the top vertical irradiation, forms the point spot on the desktop, for participants to read and write and do not affect to slide projection to explain (in the general lighting off or the brightness down case).

2) the lighting effect is arranged on the top of high,
difficult to maintain The end lighting system for the hotel lobby tall dome of Gypsophila paniculata modelling, with diverging lens type crystal tail piece and a rotating glass color wheel, to form the dynamic effect of the stars shining, the general lighting system non comparable with the Fiber optic lighting.

3) leading lighting outdoor public areas of the building
The floor tube type (line emitting) system or underground light indexing (End point emitting) system for sign lighting, reduced light maintenance workload compared with general lighting,and there is no risk of leakage.

4) outdoor fountain underwater lighting
Adopt the end emitting system,the allocation of water type terminal, used for outdoor fountain underwater lighting, and the audio signal output by the audio system synchronization control of light output and color transform. The lighting effects and good safety to the lighting system of low pressure water under the regular, and easy to maintain, no risk of leakage.

5) building outline lighting and facade lighting
Using the line emitting system combined with terminal of the lighting system mode, for building contour and facade lighting. Its construction is convenient, short installation period, has a strong timeliness, and can be used repeatedly, saving investment.

 6) buildings, local lighting of cultural relics
By the end of luminous system, configuration condensing lens type or diverging lens type light emitting terminal annex for indoor local lighting. Such as the Museum of temperature and humidity and ultraviolet, infrared painting heritage or print artifacts of the special control requirements of silk cultural relics, local lighting, are used in fiber optic lighting system.

7), billboard lighting lamp box
Line light fiber soft and not easy to fold and fragile, easy to be processed into different patterns, without the risk of electric shock, no need of high voltage transformer, can automatically change color, and convenient construction and installation, can be repeatedly used. Therefore, is often used to set in the buildings on the billboard lighting. Compared with those of traditional neon lamp, fiber optic has an obvious advantage!

Fiber optic lighting and LED lighting

Nowadays, in the green lighting concept advocacy, the emergence of various lighting techniques continuously, fiber optic lighting and LED lamp as the emerging lighting technology, always walk in the forefront of the field of green lighting.
Fiber optic lighting is the light spread abroad through optical fiber light source generator to a designated area of the lighting mode, it has the following characteristics:

1) Due to the linear propagation principle of its characteristics and optical fiber, optical fiber can put the light propagation to any place in theory, meet the diversity of practical application.

2) we can obtain a variety of light colors we need through the filter device, in order to meet the needs for light color under different environments.

3) through the design and installation of optical fiber tail parts, lighting from the abstract transition become of visualizing. Fiber optic lighting gives light texture, the sense of space, even given the light of life and personality.

4) fiber optic lighting can achieve photoelectric separation, this is a qualitative leap, not only improves the safety performance, but also expansion of the application field。

5) lighting system of plastic optical fiber is soft light, no light pollution. Plastic optical fiber decorative lighting using filtered spectra way of changing the light source emitting light colors, through the optical fiber transmission, color is more soft and pure, give people the visual effect is very prominent。

6) General light source includes not only visible light, but also includes the infrared and ultraviolet.

We need to avoid the infrared and ultraviolet In some special occasions, for example: cultural relics, such as lighting. As the range of low loss window of plastic optical fiber in the visible spectrum, infrared and ultraviolet transmittance is very low, in addition the special treatment of the source machine,so the light emitted from the optical fiber is no infrared and ultraviolet luminescence.From the characteristic about fiber optic lighting, now and then have a look of the characteristics of LED.LED (Light Emitting Diode) is a semiconductor that can transform electric energy into visible light of the, it has changed the principle of tungsten filament lamp light and energy-saving light of tricolor lighting, while the use of electroluminescence. It has the following characteristics:

1) voltage: LED using low voltage power supply, power supply voltage between 6-24V, according to the different products vary, so it is a kind of safer power supply than the use of high voltage power supply.

2) efficiency: Energy consumption reduced by 80% than the incandescent lamp of the same brightness.

3) applicability:Each element of LED is small 3-5mm square, so the devices can be prepared into various shapes, and is suitable for variable environment.

4) stability:100000 hours,light attenuation for the initial 50%。

5) response time:The response time of the incandescent lamp is in milliseconds, response time of LED lamp for ns level.

6) To the pollution of the environment: no harmful metal mercury.

7) color:adjustment the current can change color, light-emitting diodes by chemical modification methods, adjustment the band structure and band gap to draw a lighting of red yellow green blue color light orange。

8) LED the price is expensive, compared with incandescent lamps, a few LED prices can and an incandescent lamp for the same price, but usually each signal lamp by 300 ~ 500 diodes form 。Due to the unique advantages of fiber optic lighting and LED bulbs, they have been widely used in various occasions, and in the promotion of constantly。

What factors is relationship for led fiber machine prices?

In order to achieve the effect of the place using light, at present application of LED fiber machine is very wide. But a lot of user for LED fiber machine price is also very concerned, for this kind of products, prices are different。The user can focus on specific information that affect product prices, which are a very important significance for the user, and you should be better this aspect of cognition.Manufacturers of the different factors affecting the price of nature is very important, so the user can better focus on the content in specific life. But in the choice of specific manufacturers, manufacturers of the scale, word of mouth must be put in the first place, the only way to produce a specific effect is very good product。the user can better attention of manufacturers Select the content, which is directly related to the quality of the product problems.In addition to the differences manufacturers, LED fiber optic machine prices also affected by the complexity of the specific nature of light to decisions. If a specific color of light is a single, then draw the effect of such a nature is relatively simple. However, if the build out of the color is very complicated, so it also can have very good effect.user can pay attention to the product specific information, the specific content of the product also determine the final price.As for the LED optical fiber machine, heat dissipation in the process of the work is also very important, but the quality of the fan also has influence on the price of LED optical fiber machine。the user can be on the specific issues to be analyzed, when to have a better understanding of the problem, can find the best effect, the content of hope everyone can better cognition in this optical fiber machine, so that can have very good effect.

LED fiber machine specific power is different,
the work effect is the existence of certain otherness when different power of specific work in the process of power consumption. The user can be a general of understanding of the content, when can have better overall content of cognition。The user can be created very good effect, and can recognize the problem. ow The user for LED fiber machine price has certain recognized it, we hope all my customer are better able to pay attention to this aspect of the LED optical fiber machine. The user able to obtain a better cognition of this problem, and can achieve better results. Lighting system of course taken is very important, for the specific luminescent effect has a very big impact, we hope everyone can better attention to this issue,

Learn to install fiber optic lights, grasp the correct installation method

Fiber optic lights in life very wide range of applications, and to bring the visual effect is very good. But the lights only after successful installation to be able to work normally, so a lot of friends for optical fiber lamp mounting method is also very concerned about, and hope can better understand the content of the specific installation methods. In fact, the specific method is not very difficult, you must be more carefully for the process of installation。The light emitting device is very important for the optical fiber lamp, in the process of installing ,please fellow to better focus on the content.
must be installed in areas that not easily accessible to outsiders but also very easy to repair,thus can reduce the light emitting device problem frequency, and the location is convenient to repair, once the machine has a problems, the concrete repair tend to become more simple, so everyone can better to Learn the content in this respect.In the installation process of optical fiber lamp。in order to better protect the fiber。We can be adopt the PVC plastic pipe mode。so that it can have a better effect. And the installation process, be sure to try to avoid that let product bend, as long as the product has remained flat state, so that we can have very good results, the content we can better focus on all aspects.In the process of fiber optic lights installation, in order to better resolve the specific problems。 installing strong point with the luminous light-emitting fiber optic connectors must handle terminal attachments. Specifically, when the connection is good as long as they pay attention not to have dust port, then the specific installation effects are very good. So everyone should better handle content in this area, so we able to can create perfect characteristics.In the specific installation process of optical fiber lamp, attachments are also more and more. Therefore, the installation process should not fall any attachments, so they can achieve a more perfect installation。 Such as a whole to be able to have a more perfect development。Optical fiber lamp installation method is very simple, as long as the specific installation process workers to intentions are no problem. And many manufacturers are to provide after sale service and installation services, so most of the specific installation process will be able to deal with very professional, so friends don’t have to feel too much to worry about. Finally the city life become colorful because of the optical fiber lamp , night more beautiful in the city.

Discussion on “Lighting projects“

With the development of LED technology, the LED light and optical fiber lamp more and more varieties in the Lighting projects, because users know at the praise and love it so that it developed rapidly, as the saying goes, a user need, to have the market, there are a large number of people to join the market only to LED decorative lights army to go,
Due to years of study and practice experience and obtained numerous LED Experience , now , share with everone, especially for some eager to decorate his store and some young lighting designers. Now from LED decorative lights and fiber optic lights start,then fiber optic chandeliers and other eleven Share:
Installation design essentials of the LED digital tube:
If you are a lighting designer than want to design and install the LED digital tube in the early design drawings.you must first understand its properties and characteristics, is suitable for installation, and beside the building can match play its maximum effect?   If you select multiple full-color LED digital tube is suitable for a few bars, a nightclub hall walls and floors, bars, nightclubs, performing arts hall and avoid the light is too bright,otherwise, it should not show some advantages, and LED lighting will be “blooming “and makes the LED digital tube has powerless, this can be done in addition to the digital display,and it can also be installed on both sides outside the interior walls in the bar, which has an effect, I feel quite good, LED lights constantly running, even there is a thrill through time and space. If we add the console directly controlled by the DJ,and the user can get whatever user wants.

What are the types of fiber optic lights?

Fiber optic lights can be fused to a variety of colors , can able to create the very perfect effect of art. Specifically, the fiber optic lights bring to people’s lives very much color, but many of my friends for not fully understand the type of fiber optic lights and friends can better cognitive content in this article, when the problem is to understand the overall , this issue will be able to have more awareness. So every friend should also be better wealth of knowledge, so as to have better results.In fact, optical fiber has a very long history, but also a lot of specific types. If you want to learn again from all aspects, then it would be difficult to achieve this desire. However, most of the fiber cognitive has low energy consumption, low dispersion characteristics, wiring easy, inexpensive, etc., precisely because of this, so the utilization of fiber optic lights will be so high, we can be better in this regard problems.And the types of fiber light type and light is a concept actually, so friends can better attention that the specific content of light. From the working wavelength of fiber can be divided into ultraviolet ray, optical fiber, optical fiber and considerable near infrared infrared fiber. Base on the refractive index, optical fiber can be divided into nearly step type optical fiber, gradient of optical fiber lamp type, in addition, the fiber can also through the manufacturing method of transmission mode, raw materials, and so on to classification.The fiber specific classification is really a very complex content, so ladies and gentlemen, so friends if you want to better understand the content, so it can be a full range of pay close attention to the problem. And each fiber all have their own characteristics belong, the professionals for various types of fiber also has a certain understanding. The fiber optic lights made ​​of specific characteristics are different, which is why the optical fiber lamp can be created out of one of the reasons the colorful characteristics.