Fiber optic lighting has many characteristics。makes its application is very extensive, Based on the use of different locations and the effect of the application example to analysis and explain。

1) Video conferencing desktop lighting
By the end of luminous system, configuration condensing lens type light emitting terminal accessory by the top vertical irradiation, forms the point spot on the desktop, for participants to read and write and do not affect to slide projection to explain (in the general lighting off or the brightness down case).

2) the lighting effect is arranged on the top of high,
difficult to maintain The end lighting system for the hotel lobby tall dome of Gypsophila paniculata modelling, with diverging lens type crystal tail piece and a rotating glass color wheel, to form the dynamic effect of the stars shining, the general lighting system non comparable with the Fiber optic lighting.

3) leading lighting outdoor public areas of the building
The floor tube type (line emitting) system or underground light indexing (End point emitting) system for sign lighting, reduced light maintenance workload compared with general lighting，and there is no risk of leakage.

4) outdoor fountain underwater lighting
Adopt the end emitting system，the allocation of water type terminal, used for outdoor fountain underwater lighting, and the audio signal output by the audio system synchronization control of light output and color transform. The lighting effects and good safety to the lighting system of low pressure water under the regular, and easy to maintain, no risk of leakage.

5) building outline lighting and facade lighting
Using the line emitting system combined with terminal of the lighting system mode, for building contour and facade lighting. Its construction is convenient, short installation period, has a strong timeliness, and can be used repeatedly, saving investment.

 6) buildings, local lighting of cultural relics
By the end of luminous system, configuration condensing lens type or diverging lens type light emitting terminal annex for indoor local lighting. Such as the Museum of temperature and humidity and ultraviolet, infrared painting heritage or print artifacts of the special control requirements of silk cultural relics, local lighting, are used in fiber optic lighting system.

7), billboard lighting lamp box
Line light fiber soft and not easy to fold and fragile, easy to be processed into different patterns, without the risk of electric shock, no need of high voltage transformer, can automatically change color, and convenient construction and installation, can be repeatedly used. Therefore, is often used to set in the buildings on the billboard lighting. Compared with those of traditional neon lamp, fiber optic has an obvious advantage!

Nowadays, in the green lighting concept advocacy, the emergence of various lighting techniques continuously, fiber optic lighting and LED lamp as the emerging lighting technology, always walk in the forefront of the field of green lighting.
Fiber optic lighting is the light spread abroad through optical fiber light source generator to a designated area of the lighting mode, it has the following characteristics:

1) Due to the linear propagation principle of its characteristics and optical fiber, optical fiber can put the light propagation to any place in theory, meet the diversity of practical application.

2) we can obtain a variety of light colors we need through the filter device, in order to meet the needs for light color under different environments.

3) through the design and installation of optical fiber tail parts, lighting from the abstract transition become of visualizing. Fiber optic lighting gives light texture, the sense of space, even given the light of life and personality.

4) fiber optic lighting can achieve photoelectric separation, this is a qualitative leap, not only improves the safety performance, but also expansion of the application field。

5) lighting system of plastic optical fiber is soft light, no light pollution. Plastic optical fiber decorative lighting using filtered spectra way of changing the light source emitting light colors, through the optical fiber transmission, color is more soft and pure, give people the visual effect is very prominent。

6) General light source includes not only visible light, but also includes the infrared and ultraviolet.

We need to avoid the infrared and ultraviolet In some special occasions, for example: cultural relics, such as lighting. As the range of low loss window of plastic optical fiber in the visible spectrum, infrared and ultraviolet transmittance is very low, in addition the special treatment of the source machine，so the light emitted from the optical fiber is no infrared and ultraviolet luminescence.From the characteristic about fiber optic lighting, now and then have a look of the characteristics of LED.LED (Light Emitting Diode) is a semiconductor that can transform electric energy into visible light of the, it has changed the principle of tungsten filament lamp light and energy-saving light of tricolor lighting, while the use of electroluminescence. It has the following characteristics:

1) voltage： LED using low voltage power supply, power supply voltage between 6-24V, according to the different products vary, so it is a kind of safer power supply than the use of high voltage power supply.

2) efficiency： Energy consumption reduced by 80% than the incandescent lamp of the same brightness.

3) applicability：Each element of LED is small 3-5mm square, so the devices can be prepared into various shapes, and is suitable for variable environment.

4) stability：100000 hours，light attenuation for the initial 50%。

5) response time：The response time of the incandescent lamp is in milliseconds, response time of LED lamp for ns level.

6) To the pollution of the environment: no harmful metal mercury.

7) color：adjustment the current can change color, light-emitting diodes by chemical modification methods, adjustment the band structure and band gap to draw a lighting of red yellow green blue color light orange。

8) LED the price is expensive, compared with incandescent lamps, a few LED prices can and an incandescent lamp for the same price, but usually each signal lamp by 300 ~ 500 diodes form 。Due to the unique advantages of fiber optic lighting and LED bulbs, they have been widely used in various occasions, and in the promotion of constantly。

In order to achieve the effect of the place using light, at present application of LED fiber machine is very wide. But a lot of user for LED fiber machine price is also very concerned, for this kind of products, prices are different。The user can focus on specific information that affect product prices, which are a very important significance for the user, and you should be better this aspect of cognition.Manufacturers of the different factors affecting the price of nature is very important, so the user can better focus on the content in specific life. But in the choice of specific manufacturers, manufacturers of the scale, word of mouth must be put in the first place, the only way to produce a specific effect is very good product。the user can better attention of manufacturers Select the content, which is directly related to the quality of the product problems.In addition to the differences manufacturers, LED fiber optic machine prices also affected by the complexity of the specific nature of light to decisions. If a specific color of light is a single, then draw the effect of such a nature is relatively simple. However, if the build out of the color is very complicated, so it also can have very good effect.user can pay attention to the product specific information, the specific content of the product also determine the final price.As for the LED optical fiber machine, heat dissipation in the process of the work is also very important, but the quality of the fan also has influence on the price of LED optical fiber machine。the user can be on the specific issues to be analyzed, when to have a better understanding of the problem, can find the best effect, the content of hope everyone can better cognition in this optical fiber machine, so that can have very good effect.

LED fiber machine specific power is different,
the work effect is the existence of certain otherness when different power of specific work in the process of power consumption. The user can be a general of understanding of the content, when can have better overall content of cognition。The user can be created very good effect, and can recognize the problem. ow The user for LED fiber machine price has certain recognized it, we hope all my customer are better able to pay attention to this aspect of the LED optical fiber machine. The user able to obtain a better cognition of this problem, and can achieve better results. Lighting system of course taken is very important, for the specific luminescent effect has a very big impact, we hope everyone can better attention to this issue,

Fiber optic lights in life very wide range of applications, and to bring the visual effect is very good. But the lights only after successful installation to be able to work normally, so a lot of friends for optical fiber lamp mounting method is also very concerned about, and hope can better understand the content of the specific installation methods. In fact, the specific method is not very difficult, you must be more carefully for the process of installation。The light emitting device is very important for the optical fiber lamp, in the process of installing ，please fellow to better focus on the content.
must be installed in areas that not easily accessible to outsiders but also very easy to repair，thus can reduce the light emitting device problem frequency, and the location is convenient to repair, once the machine has a problems, the concrete repair tend to become more simple, so everyone can better to Learn the content in this respect.In the installation process of optical fiber lamp。in order to better protect the fiber。We can be adopt the PVC plastic pipe mode。so that it can have a better effect. And the installation process, be sure to try to avoid that let product bend, as long as the product has remained flat state, so that we can have very good results, the content we can better focus on all aspects.In the process of fiber optic lights installation, in order to better resolve the specific problems。 installing strong point with the luminous light-emitting fiber optic connectors must handle terminal attachments. Specifically, when the connection is good as long as they pay attention not to have dust port, then the specific installation effects are very good. So everyone should better handle content in this area, so we able to can create perfect characteristics.In the specific installation process of optical fiber lamp, attachments are also more and more. Therefore, the installation process should not fall any attachments, so they can achieve a more perfect installation。 Such as a whole to be able to have a more perfect development。Optical fiber lamp installation method is very simple, as long as the specific installation process workers to intentions are no problem. And many manufacturers are to provide after sale service and installation services, so most of the specific installation process will be able to deal with very professional, so friends don’t have to feel too much to worry about. Finally the city life become colorful because of the optical fiber lamp , night more beautiful in the city.

Optical fiber lamp is made of plastic optical fiber, One is the Endpoint fiber(tail light is the endpoint), another is the whole fiber (the whole line light). Generally use the endpoint of fiber diameter is 0.75MM, 1.0MM 1.5MM,

With the development of LED technology, the LED light and optical fiber lamp more and more varieties in the Lighting projects, because users know at the praise and love it so that it developed rapidly, as the saying goes, a user need, to have the market, there are a large number of people to join the market only to LED decorative lights army to go,
Due to years of study and practice experience and obtained numerous LED Experience , now , share with everone, especially for some eager to decorate his store and some young lighting designers. Now from LED decorative lights and fiber optic lights start,then fiber optic chandeliers and other eleven Share:
Installation design essentials of the LED digital tube:
If you are a lighting designer than want to design and install the LED digital tube in the early design drawings.you must first understand its properties and characteristics, is suitable for installation, and beside the building can match play its maximum effect?   If you select multiple full-color LED digital tube is suitable for a few bars, a nightclub hall walls and floors, bars, nightclubs, performing arts hall and avoid the light is too bright,otherwise, it should not show some advantages, and LED lighting will be “blooming “and makes the LED digital tube has powerless, this can be done in addition to the digital display,and it can also be installed on both sides outside the interior walls in the bar, which has an effect, I feel quite good, LED lights constantly running, even there is a thrill through time and space. If we add the console directly controlled by the DJ,and the user can get whatever user wants.

Fiber optic lights can be fused to a variety of colors ， can able to create the very perfect effect of art. Specifically, the fiber optic lights bring to people’s lives very much color, but many of my friends for not fully understand the type of fiber optic lights and friends can better cognitive content in this article, when the problem is to understand the overall , this issue will be able to have more awareness. So every friend should also be better wealth of knowledge, so as to have better results.In fact, optical fiber has a very long history, but also a lot of specific types. If you want to learn again from all aspects, then it would be difficult to achieve this desire. However, most of the fiber cognitive has low energy consumption, low dispersion characteristics, wiring easy, inexpensive, etc., precisely because of this, so the utilization of fiber optic lights will be so high, we can be better in this regard problems.And the types of fiber light type and light is a concept actually, so friends can better attention that the specific content of light. From the working wavelength of fiber can be divided into ultraviolet ray, optical fiber, optical fiber and considerable near infrared infrared fiber. Base on the refractive index, optical fiber can be divided into nearly step type optical fiber, gradient of optical fiber lamp type, in addition, the fiber can also through the manufacturing method of transmission mode, raw materials, and so on to classification.The fiber specific classification is really a very complex content, so ladies and gentlemen, so friends if you want to better understand the content, so it can be a full range of pay close attention to the problem. And each fiber all have their own characteristics belong, the professionals for various types of fiber also has a certain understanding. The fiber optic lights made ​​of specific characteristics are different, which is why the optical fiber lamp can be created out of one of the reasons the colorful characteristics.

1,The structure of washing wall lamp:
The power module of LED washing lamp install of external shell，the space is limited，some manufacturers in order save-space 。the dip component replace by the surface component 。this method is not acceptable。The surface welding pin type component is likely to fall off due to weak weld,so for these components as far as possible to take dip package。If has been surface component please use the glue fixed。

2，The test of washing wall lamp
1）Temperature rise test
Temperature test is necessarily project of products safety test，
different standard component has temperature limit。In the product design stage,the manufacturer should attach great importance to the problem of heat dissipation products, especially for some parts (such as insulating sheet etc.) special attention should be paid to。If the long-term work in the condition of high temperature，easy to damage, resulting in a fire or electric shock hazard.The power supply module inside the lamp in a closed small space, heat limited. Therefore, when the manufacturers choice the components,should pay attention to choose the appropriate components according with product specification, ensure the components working in a right range, thus avoiding the components to work close to full load under the condition to produce heat。
2)The aging test
When The LED wall washing lamp production is finish ,the need for LED wall washing lamp for about 24 hours aging test, after aging test should be tested for water resistance at once!

        The test shelf of washing wall lamp

(1) The power size:
The power size of washing wall lamp has decided projection distance，in general has 18W,24W,36W,48W parameters. But power is not fixed。The power can changed According with customer claim，high power LED washing wall composed of the single row led， the LED line cast lamp composed of multi row led。
In addition，because the heat dispel problem， adopt single 1W to make washing wall lamp with 1 meters not more than 36W! otherwise，will be appear light attenuation when heat dispel situation is not good。

(2)voltage:
Can be divided into DC and AC，the in general built-in power external line AC220V(Japan AC110V)，external module as low voltage DC24V，DC12V，DC27V etc..
according with the demand 、different product factory and voltage。

(3)IP protection grade:
IP65   6 represents: completely prevent the dust entering
5 represents: not any harm with water washing。

(4) colors specification: divided into colorful, full color, monochrome

(5) the color temperature: about 2200K (amber) 3000K(warm
white)4000K(incandescent)6000K(white)7000K(cool white)

(6) emitting angle:
high power LED wall washing lamp(narrow angle) of the most distant valid projection distance is 5-10 meters。Lighting emitting angle is narrow so project distance more far!

LED washing wall lamp，the lighting like water washed walls，mainly purpose is decoration of the building。And to draw the outline of a large building。
and to draw the outline of a large building outline! Since LED has the advantages of energy saving, high luminous efficiency, color is rich, long service life, so in the wash wall lamp in 2013 the other light source is gradually replacing LED wall washing lamp. LED wall washer lamp has become one of the important role of modern outdoor lighting, lighting designers used widely most.
LED wall washer lamp also called linear LED cast light lamps and so on, because of its shape is an elongated, also somebody will call the LED lamp, the technical parameters and the LED spot light is broadly similar，compared with the round structure of LED cast light lamps, heat radiating device structure of LED wash bar wall lamp more good processing point.