Installation Instructions forSide Emitting LED Strip Lights

* Side emitting LED flexible tape using (120 LEDs)
per metre. This LED tape emits light from the side allowing the
LED tape to be used around curves making it perfect for applications such as signage and light boxes.
* This LED side emitting tage is cuttable every33.3mm(every 3 LEDs)using scissors, is fully
dimmable and is supplied with a 3M sticky tape
backing for easy installation.
*This side light emitting LED tape operates from
(12vdc and 10 metres) can be powered as a single
length.Longer run lengths are possible by introducing additional

Power supplies.

1. Clean the mounting area with alcohol prep swab.

2. Remove backing paper from two sided tape on back of light. Apply light at desired location and press lightly onto the bike.

3. Connect red wire to desired power source, such as running, brake, or turn signal circuit.

4. Connect Black Wire to proper ground.

5. Test for proper operation.

The advantage of Side Emitting LED Strip Lights:

1, Power saving, less heat, only low power consumption, suitable for any 9-14V car power;

2, Long service life, using this product is imported LED lamp wick;

3,  Fully sealed waterproof design (high quality soft sealed), 100% waterproof;

4, The pressure, shock, impact resistant, soft material, durable;

5,  High brightness, long service life, brightness uniformity, no color, wide coverage

 

1, What is the difference between the 5050 SMD LED and the 3528 SMD LED Mainly represents specifications outline dimensions: 35mm*28mm, 50mm*50mm size is not the same, the power is not the same, in SMD 3528 application, whether in brightness or in life are not advantages compare with SMD 5050, size is not the same. 2, What are these use for the 3528 and 5050 SMD LEDSMD 3528 and SMD 5050, is surface encapsulation size of SMD. Using the package dimensions as name. Compare with The DIP lamp ,the lamp brightness of Surface mount type SMD lamp is low , but compared other, convenient repair, angle is bigger. So the general almost use the SMD chip LED in indoor LED display screen　 3, LED soft lamp strip 50505050 is the LED package types. The package dimensions as Name (SMD5050). Refers to the 5050 type LED lamp.
4, what does mean about compatible with piranha 02.03.04? How are SMD? What is big power?
Piranha is composed of a SMD chip, 02.03.04 is LED the type of the bracket. SMD=”Surface Mounted Devices”, meaning: surface mount device SMD is a unified model of product. For example: TOP, Chip, can become a SMD, is also belong to the flat package.SMD chip is a bit vague, encapsulated with 5050 or 3528 SMD chip to do the piranha.
Of course, there are many kinds of the chip size. Used to do the SMD size ranging from 7 * 9mil–24 * 10mil.High power: voltage is more than 0.5W, can call the big power.
Basic knowledge of LED Testing Technology
The forward voltage: through the forward current of light emitting diode in order to determine the value, the voltage drop generated in the polarization .

Reverse current: in order to determine the value of the reverse voltage across the light-emitting diode (when the current flowing through the light emitting diode).

The peak wavelength: power maximum of spectral radiant.

Half intensity angle: the luminous (or radiant) intensity distribution, luminous (or radiant) luminous intensity is greater than or equal to the maximum intensity constituted half angle.The dominant wavelength: any color can be looked at as a spectral color, according to a certain proportion and a reference light source (such as the CIE standard light source A, B, C, etc. can source E standard illuminant D65) phase mixing and matching color coming out, the main wavelength of the spectral color is the color. Dominant wavelength is equivalent to the human eye observation to color palette (mental capacity). If you have obtained the chromaticity coordinate measured LED device, can use to white E light source (x0=0.3333, y0=0.3333) as a reference to calculate the main wavelength and determines the color of the light source. Calculation based on a chromaticity diagram connection reference slope straight line light source color point and the sample color chroma point of intersection line, look-up table read and spectral locus, determine the main wavelength.

The average intensity of light source: ratio of units in a given direction on a solid angle element is contained within a small flux D Phi V and the solid angle of D Candela (CD)

Radiation bandwidth: spectral radiant power is greater than or equal to the maximum value of half the wavelength interval

LLZ the principle of infrared, infrared remote control has been widely used in home appliances and industrial control system, understand their work principle and performance, further made the infrared remote control system, also is not difficult.
characteristic of infrared eye can see the visible light wavelength, according to arrangement, in turn (from long to short) for the red, orange, yellow, green, cyan, blue, purple, as shown in figure
1. Can be seen from the graph, the red light in the wavelength range of 0.62μm ~ 0.76μm, longer than the red wavelength light is infrared. Infrared remote control is the use of wavelength of 0.76μm ～1.5μ m near to transmit a control signal. Mainly Feature of Infrared is that it does not interfere with other electrical equipment, it will not affect the surrounding environment. the Circuit debugging simple, if the transmitted signal code, can realize the function that multi-channel infrared remote control.
2 Infrared remote control system of infrared emitting and receiving
people see consists of transmitting and receiving the two part. The emission component parts for infrared emitting diode, it emits infrared rather than visible light, as shown in figure
2.Common infrared wavelengths emitted from the light emitting diode is about 940nm, the shape and the ordinary 5 mm light emitting diode is the same, but different colours. In general there are transparent, black and dark blue three. Method for judging the quality of infrared light emitting diodes is same with ordinary diode.emitting power of the infrared light emitting diodes is about 100mW. Luminous efficiency with a special instrument for determination, on amateur conditions, can rely on the experience with the distance of roughly determination method. The infrared receiving tube receiving circuit is a photosensitive diode, when used for infrared receiving diode reverse bias voltage is applied, it can work normally and obtain high sensitivity.How it works: infrared photosensitive resistance is actually a resistance.in a high impedance state is close to the 6K when not have infrared lighting. completely avoid the light may not only, The mainly parameter of Infrared LED(receiving module) as follows:
work voltage：4.8～5.3V
work currently：1.7～2.7mA
receive frequency：38kHz
peak value of wavelength：980nm
static state of output：High level
low level of output：≤0.4V
high level of output：VDD voltage
The infrared receiving diode are generally circular and square two. Because the transmitting power of the infrared light emitting diodes are small, weak signal received by the infrared receiving diode, so the receiver will increase the high gain amplifier circuit.

The main material:
LED guardrail lamp; guardrail lamp mounting clips, waterproof transformer, the main controller LED guardrail lamp,

Auxiliary materials:

Male and female plugs, super five lines, two core power line, self tapping screws, colloidal particles etc.LED external control guardrail lamp installation steps:

The first step: the first LED guardrail lamp mounted to the wall: holes in the wall, installed expansion screws, and then install LED guardrail lamp, guardrail lamp with tapping screws; the distance between depending on customer requirements; generally is 1CM to 3CM.

The second step: then the signal line and LED guardrail lamp power line are jointed together, the signal line is generally four or five conductors have male and female plug two core; power line is two core of male and female plug;

The third step: install the power (transformers or switch power supply);According to the power of the transformer and guardrail lamps power to calculate how many a guardrail lamp can load each transformer; for example, LED colorful guardrail lamp with 108 LED lamp is 10W/M; LED guardrail lamp 144 lamp is 12W/M; if the aterproof transformer 400W, it can take 108pcs 36M lamp tube; 144 lamp with 32 M pipe. If the transformer can take 36M tube; put the transformer into 18 and 19 intermediate; connected with two lines, each side with 18.

Note: 1 the transformer is generally only used to power 80% to 90%;2 whether the power transformer is strong, each side connection pipe is best not more than 25M; because the power supply wire has the power loss; The LED guardrail lamp far from power supply the brightness is low;
The fourth step: LED guardrail lamp controller installation;
First install the sub controller, the controller is connected to the LED guardrail lamp directly; the in generally the sub controller gave three out ends of line , one end of a general power line is connected to 24V or 12V, pay attention to the sub controller can but supply to the power supply line.the power supply line can but the sub controller, other power supply has to be additionally connected guardrail tube, and the other two signal line is: a signal line is connected to the input of main controller; other signal line is output signal of guardrail tube。 the sub controller which connected with the branch control mark!Signal connect signal (five cores of male and female inserted), power supply is connected with a power supply (two cores of male and female inserted); then the main controller and sub controller connect together, if the control and main control distance will be far(pls adopt super five net lines), so that the signal is best; with a fixed number of LED digital tube, in general can be load to 100M; outline profile building body, each sub control with a channel; the specific situation according to LED renderings to install(manufacturers will help you calculate how much the sub control is require, the general will have installation drawings). NOTE:cut the digital tub line of different loop

The fifth step: electricity, communication

The transformer connect to a main power supply of 110V, and then using an air switch and a time switch; Control LED digital tube (LED guardrail lamp) unified electricity; and then the main control plug device inserted in the 110V power supply. The LED internal (monochrome & permanence lighting) guardrail tube installation:Monochrome guardrail tube connect to power supply with the electric line directly, internal control guardrail lamp installation, directly connected to the corresponding power line; here also mentioned that the internal control number LED guardrail lamp installation: internal number of guardrail lamp must be installed according to the order of a pipe installation; if not by the installation sequence will end up the whole synchronization. Internal control and internal control number guardrail tube must be energized simultaneously, to ensure the effect of synchronous change! Must be connected transformers or switch power supply with low voltage switching power supply, transformer or installed in the intermediate guardrail tube, will the effect of such a guardrail tube is more uniform!

Usually Red light is used as a night vision. The red light will not cause your pupil contraction, and lighting extinguished, your eyes do not need to re adapt to the dark. Red is usually in monochrome print processing is used as a “safe” color, because it will not damage of printing negatives。 yellow light has some advantages of red light and white light. Yellow light another advantage is that when you are reading less，because of long time reading cause eye fatigue Under blinding and reflection light。Green light can also be used as a night vision; the green light is especially suitable for reading a map or chart during the night. It is not so easy to be found by night vision equipment, are vulnerable to human discovery, bright green light lower than red.Blue light can be used to map reading; it is often favored by military personnel in the night, because blue light increased the contrast level. It can also be used as background work lights theatre and the performances of the color ighting.Blue&green light have similar advantages with green light at night vision, but with the color characteristics of blue-green light increases, some users like blue&green light for this reason.Red is used together with infrared night vision equipment. Otherwise, the human eye is invisible to infrared led light.Ultraviolet light is usually used as identification whether the banknote forgery, some UV light emitting diode lighting is popular in nightclubs and parties, they are used to make fluorescent material emits more light.The color of the light and light wavelength whether we can see The color of the light is determined by its wavelength, the units of light wavelength is nano ，also said to be 1/1000000000 meters. The following is the color of the light wavelength.
In the infrared glow

4600nm – 1600nm – no visible light

Low infrared light

1300nm – 870nm – no visible light

850nm – 810nm – hardly visible light

Near infrared light

780nm – when the direct observation can be seen a very dark cherry red light

770nm – when the direct observation can see a deep cherry red light

740nm – deep cherry red light

The red light

700nm – deep red

660nm – red

645nm – a bright red

630nm – Orange red

620nm – Orange

The orange light

615nm – orange light

610nm – the orange light

605nm – amber light
The yellow light

590nm – “sodium” yellow

585nm – yellow

575nm – lemon yellow / light green

The green light

570nm – light greenish blue green

565nm – Green

555nm – 550nm – fresh green

525nm pure green

505nm – Green / blue green

500nm – light green blue

495nm – sky blue

Blue

475nm – azure blue

470nm – 460nm- bright blue

450nm – pure blue

Blue purple

444nm – dark blue

430nm – blue and purple

Violet light

405nm – pure purple

400nm – Deep Purple

Near ultraviolet light

395nm – reddish purple

UV-A type ultraviolet light 370nm is almost not visible, by wood glass filter is displayed at a dark purple.White light emitting diodes have to purplish white yellowish. White light emitting diode temperature range as low as 4000°K to 12000°K. Common white light emitting diode as 6500°- 8000 K.

The basic method of infrared detection is divided into two types: passive and active. Passive infrared detection equipment in the application more; active infrared detection can be divided into single and double-sided method, in infrared detection method of heating method measured target is divided into steady and unsteady heating heating.Infrared detection instrument installation and delivery modes: fixed, portable, vehicle mounted and airborne type (helicopter loading) etc..
(1) the passive infrared detection means the measured target don’t hot up when check of infrared detection, using only measured target temperature to draw infrared detection on process of heat exchange between the measured target and environment。passive infrared detection used in the operation of device,components and scientific experiment。It no additional heat source，the basic all adoption with this way。
(2) active infrared detection of active infrared detection is the infrared detection before measured object active heating, heating source from the measured target. Way of make heat divided into a steady and non steady。infrared detection according to the different situation can be carried out in the heating process,also can be in stop heating for a certain period of time after continue their detection.

Method:
(1) one side detection:
sameMeasured Target make heating and infrared detection On same side.
(2) double-side method:
relative to the single single-sided method(the above method), double method is put on the heating measured target and infrared detection respectively in the target the positive and the negative two aspects.
(3) heating method:
1) steady state heating: steady heating mode will be measured target is heated to its internal temperature.the temperature will be reaches the homogeneous steady state, then it is placed in a lower (or higher) infrared detection of the constant temperature environment to check. This approach used for quality testing of materials, such as the analyte internal cracks, holes or debonding defects, then the measured object and environment of heat exchange in heat flow will be affected by the defects of obstacles, the corresponding outer surface can produce the change of temperature, compared with no surface defects will appear difference.
2) unsteady heating: heating of the measured target, do not need to make the internal temperature reaches the uniform or stable state.
3) as the heat into the measured object being tested evenly, heat flow into the inner speed should be decided by its internal conditions, if the internal defects, will become a baffle heat resistance, after a certain time will generate heat accumulation, will produce heat. Heat flux varies depending on the position of the defect caused by defects, direction, geometric dimensions and material thermal physical properties.

The basic method of infrared led detection is divided into two types: passive and active. Passive infrared detection equipment in the application more; active infrared detection can be divided into single and double-sided method, in infrared detection method of heating method measured target is divided into steady and unsteady heating heating.Infrared detection instrument installation and delivery modes: fixed, portable, vehicle mounted and airborne type (helicopter loading) etc..
(1) the passive infrared detection means
The measured target don’t hot up when check of infrared detection, using only measured target temperature to draw infrared detection on process of heat exchange between the measured target and environment。passive infrared detection used in the operation of device,components and scientific experiment。It no additional heat source，the basic all adoption with this way。
(2) active infrared detection of active infrared detection is the infrared detection before measured object active heating, heating source from the measured target. Way of make heat divided into a steady and non steady。infrared detection according to the different situation can be carried out in the heating process,also can be in stop heating for a certain period of time after continue their detection.

LED flexible neon tube is the most recent novel, is the most popular LED a breakthrough product, it makes up for the deficiency of neon tube and glass fiber. LED flexible neon lamp is a professional linear decorative lighting products, although looks and neon led lamp has no difference with common lighting products, but can be arbitrarily bending, with crushing and waterproof function, can be used in indoor and outdoor. Relative to the glass neon tube, flexible neon tube has the following advantages:
The traditional neon lamp of large investment, complex technology, the use of work tube, high voltage and inert gases have a lot of inconvenience. Flexible neon lamp adopts the structure and the new LED technology, by PVC shell special package of bright LED lighting, the use of special optical technology and specialized enclosure design, not only increased light intensity and uniformity, and the delivery process, improves the production efficiency.High brightness, light source are made of imported high brightness LED series, 80LED/ m or 90LED/ meters of encryption arrangement is the fundamental guarantee for the overall luminous effect and high brightness. Log service time and durability. Based on the technology of LED,to the new structure, makes this kind of light products can reach over 100000 hours long service life in any case, relative to the glass neon lamp, its durability without using the question, since there is no need to consider the problem of crushing glass neon lamp (PVC plastic lamp body)Energy saving. Flexible light band can save 70% energy than the energy consumption cost of use. Glass neon 26.25W/M flexible light strip, 4.7W/M (R, Y, O) 6.6W/M (G, B, W)。The traditional neon lamp transformer using the 110V voltage up to 15000V excited inert gas in the tube 。along the contour of the pattern, the font hair monochromatic light, two color requires two sets of glass tube. The font is too large, the stroke intermediate not bright; is too small, too complex, processing is difficulty. The flexible neon lamp operating voltage is only 24V, only sporadic low calorie, installation can also be cut into any length, bent into different shapes (can be bent to the radius only in the 4cm circle), very convenient to use special track installation with different surface materials together, such as wood, plastic, steel or wall. At the same time according to the designers need design decoration into different patterns.Safety. Unlike glass neon lamp, high voltage in normal operation it requires 15000V, and flexible light band in the 24V low voltage under the condition of normal operation, with its low heat, shock,the use is safe. Dynamic delivery and installation. Because of the tubes and the rainbow in the similar, which makes its transport and LED rainbow tube as safe and convenient, with the card slot is specially design, installed only when first put the card slot nail, put the card can go,
any thing is all right! installation and ordinary wires as convenient and reliable.Safety low voltage, small power consumption, because its source is LED, so even in the case of 24V, can also the normal light work, its power consumption is 4.7W/M (R, Y, O), 6.6W (G, B, W).The traditional neon lamp can work under normal temperature, the use of the process must increase voltage, electricity is also larger, high cost, short service life, inconvenient maintenance.The flexible neon lamp every point of LED is a cold light, only sporadic low heat, only equivalent to the traditional light bulb 1/7 of power consumption at the same brightness LED, the power consumption of traditional neon lamp is 28.7W/m, and the flexible neon lamp is only 4.7W/m or 6.6W/m, and LED than the traditional lamp has long service life, at the same time, LED flexible neon the lamp also has the shock, heat resistant function.Soft. Flexible light band, it can be the minimum bending to the diameter of 8CM, and can operate in either a cut edge shearing, so be bent into various text, graphics.

Ceiling lamp to buy Methods / procedures
Look at the radiator fixtures for use:Lamp radiating speed determines the LED attenuation and service life of the whole lamp. Lamp work under the condition of high temperature on long time, the light decay very fast, life is short, and the brightness of ceiling lamp is too poor, not to focus on the effect of illumination.Radiator scheme for LED ceiling lamp, the mainstream with integral type radiator way, one lamp with one radiating column mode, external fan cooling mode.In current user is more recognized way is single pearl beads a cooling column method. This approach will produce light emitting heat when quickly through the radiating column is emitted out each light bead, ensure timely cooling. While the overall type radiator is all the heat generated by the bulb is conducted to the aluminum substrate, and then through the radiator heat emitted, slower.The size of the radiator, aluminum quality will be affects the speed of heat dissipation, but also affect the whole lamp prices.The light power (commonly known as the transformer):
Transformer quality also determines the whole life of the lamp, lamp beads used more than 50000 hours no problem, if the transformer is attaint, and whole lamp is bright not up.Electronic component, transformer used in the design scheme determines the efficiency of transformer, power factor, stability, temperature rise, service life.Users can’t know the element device, from the transformer size, weight, and consult the manufacturers use electrolytic capacitors and other aspects the preliminary judgment. Differences in price of LED Ceiling lamp，quality of transformer no small proportion.Understand the brand and package beads:Bead quality decides LED ceiling lamp lighting effects, packaging technology, heat dissipation effect bulb quality key factors. Bead chip has Different brands, price is difference， The lighting effect is different too.Users can know beads scheme by consulting the manufacturer, integrity depends on the manufacturers. The low price of Ceiling lamp, making a lot of use of a defective product, color inconsistencies, brightness difference, short life, users need to pay attention to.

Ceiling lamp installation

Tools / raw material

Preparation of materials:

The LED light source 3 pcs

Circlip two piece

A lamp body shell

A piece of aluminum substrate

A terminal line

Lens 3 pcs

Solder paste spare

Screws 2 pcs

Iron reserve

Methods / procedures

First use the soldering iron to welded LED light source on the aluminum substrate
thermal paste put into back of aluminum plate and then put it inside the radiating shell;
Terminal line through the bottom of the shell，The soldering iron handle terminal lines are welded on the aluminum substrate negative pole respectively;

The lens is placed in the LED, and Fixed light source
Tightened cover and a lens;

The lamp body shell installed Are assembled together;

Then connected with the driving to be normal use

The matters needing attention

Connected with the electric voltage is 110V ，first electric closed then to install.

When the lamp Welding and aluminum plate can not be weak weld, terminal wire and the aluminum substrate can be weak weld too;

Unscrew the screws can not be screwed too tight;
The lamp can not fall.

For the development of LED lamp market for automobiles, some high-grade cars in America and Japan, Europe has begun t use of LED lighting, with the development of China’s economy, the automobile and motorcycle industry in recent years fast forward, its supporting products automobile and motorcycle lamp lights the demand quantity will be increased synchronously. Although a few years ago, LED lamp market expansion is slow, is expected to have a rapid development in the last two years, and has 2 lamp in the front combination lamps, (such as rear brake lamp and rear steering lamp) using LED light source. LED is called the fourth generation car light, LED lights in addition to higher one-time investment, compared with traditional incandescent lamps, LED has good quality and higher grade. As oil prices rise, the new energy vehicle development has attracted much attention, so energy saving is the main topic of widespread concern. LED highlights the enormous advantage in energy saving, believe that often focus on Audi’s new models may know, over the past few years continuously in the brake light on the popularity of the use of LED (light emitting diode: is composed of the electric energy can be directly converted into light energy made of crystal semiconductor compounds arsenic gallium and gallium phosphide is the basic material.) Appear in the headlight, compared with traditional incandescent lamps, LED made the headlights not only lighting effect is high, and low energy consumption. At the same brightness and high power light emitting diode when the demand for electricity is the halogen headlamps half. Although in the present circumstances, LED has not yet reached the level of energy-saving xenon headlamps, but this technique still has great development potential. Car lamp with LED lamp decoration and function is divided into two categories glorified car inside and outside with Decorative lamp, at present more than matched control circuit to realize the colorful transform. The most suitable function LED lamp indicating lamp backlight in the digital meter assembly display, before and after the turn lights brake indicator lamp, reversing lamp fog lamp profile indicating light reading lamp. The use of LED basic requirements and general use of the LED is similar, but the angle of the LED, color, brightness, voltage discrete value, depreciation, heat, ultraviolet proof and high reliability requirements to. In fact LED headlight technology has not only plays the role of decoration, a so-called “vase”, LED will rely on it