According to the design of Audi LED headlights tears eyebrow lights, it is at the side of ordinary automobile (especially the left side) to install at least one side led lamp for road lighting side, The edge-lit lighting fixtures have a wide range of lit and low cost, using the installation of car sidelight lamp will greatly reduce night will be cars, overtaking traffic accidents .

To prepare A long 30 / 60CM, two with a line (30CM length of only one cable), which could be a group of three pcs led. Recommend a car to buy two! !

Color of lighting: white, blue, red, green

Uses; Universal tears LED Light (all models of car can be installed)

Material: 335 side-emitting, each lamp reaches more than 1000MCD

Length: 30CM / 60CM

Width: 0.6CM high 0.2CM (Universal Ultra Slim, specializing in tears Design)

Background(pcb color): black
First with 12V battery power to test tears led lamps, no problem and then start the installation,
the correct way is to remove the lamp strip after careful paste from the package inside the inner edge in the headlight, direct fixed! The power directly in parallel with the width lamp (lamp power line) can be, no direct (through the fuse) to connect the battery power supply!!!
Features: side-emitting light bar (also called tears), either brightness or effects can to replacing the old front SMD light bar of illuminated; this light bar can be arbitrarily cut (3 LED lights a group of cut),can mounted in any position。 Now there are many riders install door rail, light eyebrows or relatively narrow place, this section can choose light bar (regardless of length, width, thickness are the best), easy to install (the back of a double-sided plastic)!

1. Surface sealant

2. waterproof rating of IP68, suitable for indoor and outdoor use

3.DC12V voltage

4.The rugged, high shock resistance

5. The low-power, high-brightness

6. No radiation

7. The flexible, compact size, easy to install

8. Life: 10,0000 hours
9. Can withstand temperature: -20 ℃ to 50 ℃, operating temperature: 5 ℃ to 50 ℃