Installation Instructions forSide Emitting LED Strip Lights

* Side emitting LED flexible tape using (120 LEDs)
per metre. This LED tape emits light from the side allowing the
LED tape to be used around curves making it perfect for applications such as signage and light boxes.
* This LED side emitting tage is cuttable every33.3mm(every 3 LEDs)using scissors, is fully
dimmable and is supplied with a 3M sticky tape
backing for easy installation.
*This side light emitting LED tape operates from
(12vdc and 10 metres) can be powered as a single
length.Longer run lengths are possible by introducing additional

Power supplies.

1. Clean the mounting area with alcohol prep swab.

2. Remove backing paper from two sided tape on back of light. Apply light at desired location and press lightly onto the bike.

3. Connect red wire to desired power source, such as running, brake, or turn signal circuit.

4. Connect Black Wire to proper ground.

5. Test for proper operation.

The advantage of Side Emitting LED Strip Lights:

1, Power saving, less heat, only low power consumption, suitable for any 9-14V car power;

2, Long service life, using this product is imported LED lamp wick;

3,  Fully sealed waterproof design (high quality soft sealed), 100% waterproof;

4, The pressure, shock, impact resistant, soft material, durable;

5,  High brightness, long service life, brightness uniformity, no color, wide coverage