Application Notes When fitting the ir led strip:  the matters should be paid attention to: nfrared light strip should be kept clean, good condition,especially in the front part of ir led strip can not exist like dirty contaminants, more not by friction damage, otherwise, the led will produce a reflection and scattering phenomenon from the infrared light strip, affect the infrared communication directly.

• Tools / raw material - Ir led strip
  in the course of ir led strip’work the parameters are not allowed to exceed the limit, and therefore the selection should be noted that when the substitution model and parameters of the original pipe, can not easily replace. Further, any change can not be the current limiting resistor of ir led strip
  • 2.2

  Because of the range of infrared wavelengths very wide, the led infrared light  must use paired with infrared receiving diode, otherwise it will affect the remote control sensitivity,
  and even cause loss of control.Therefore in the replacement selection, must be attention to the emission wavelength of infrared signal.

  • 3.3

  The packaging(smt package) material hardness of ir led strip is low,so the high temperature performance is worse,
  to avoid damage to joints should be away from the root of the day pin, welding temperature is not too high, not too long time more,