Piranha LED
In general the Piranha LED can be used to make the brake lights, turn lights, down lights of car. because the heat Piranha LED’s have an advantage, so can withstand 70~80ms of current. So the Piranha led has a wide lighting application of selection for led ser. To follow we’ve realized that estimates of Piranha LED power supply:
- Static led pixel (The same spacing and non-spacing , etc.);
16 * 8 real pixel single module maximum power consumption as :
16 * 8 * 3 * 0.02 =7.68
16 – 16 pixel point width;
8 – 8 pixels points higher;
3 – each pixel is composed of three circuit current;
0.02 – each way to estimate the size of the current.
NOTE: 2R1G1B real pixel adopts two pieces red LED in series connects as a channel output (current)
2.static virtual pixels (equidistance) 2R1G1B single module
maximum power 16 * 8 *4 * 0.02 =10.24
16 – 16 pixel point width;
8 – 8 pixels points higher;
4 – each pixel is composed of 4 circuit current;
0.02 –estimate the size of the circuit current.
NOTE: 2R1G1B virtual pixel has 4 red LED lamps as two channels. Counted separately for each one current channels.
3 scanning the real image (1R1G1B) or (2R1G1B): P10 full color four to sweep 16 * 16
Module as an example to show a single module maximum power consumption
16 * 8 *4 * 0.02 =10.24
16 – 16 pixel point width;
3 – each pixel by three-way current;
8 – 8 pixels higher points;
4 – 1/4 scan;
0.02 –estimate the size of the circuit current.
NOTE: 2R1G1B real pixel adopts four pieces red LED in parallel connects as a channel output (current);each power estimation using scanning plate was 80%