1 four-line LED lights with four wires, , three rows of Lamp beads (note is not the four row of Lamp beads Oh ~ ~) per row 24 Lamp beads in 1 meters,, 24*3=72.Because the power of each light bead is 0.05W, power LED lights with 72 beads is: 72*0.05=3.6W.

2 Four line LED pcb board width approximately 22mm,The thickness as 8mm, about 0.25kg/m

3  each 4 in 1 RGB LED strip with necessary with a special plug (plug with transformer); inevitable to remove the transparent plastic cover when convergence,, don’t be connect the test lamp after the cover directly.as promised easily short-circuited!

4 per meter have “scissors” signs, only in the logo was cut, only in the flag was cut, cut, or cut partial will lead to the wrong one meter does not shine! preferably before cutting a careful look at the sign position, Careful look can see.

5. Installation of LED strip, ordinary lights on the slot, straight as you can, also can be fixed with a cord or wire. if user need that exterior or vertical installation,
purchase of the other air plug and the end of the plug Is necessary. The original clip is transparent wholly, How about some glass cement when installation is finish. such as 910 is better.